WiFi Analyzer Diag
English

Support

Contact: mboti.dev@gmail.com

Contact

For a question, a problem or a suggestion about WiFi Analyzer Diag, write to mboti.dev@gmail.com. Please mention your device (iPhone, iPad or Mac), its system version and the application version shown in Settings › About.

On a Windows PC, please mention your Windows version and the application version.

WiFi Analyzer Diag Pro

iPhone, iPad and Mac

Windows

Preparing the ESP32-C5 board

On iPhone and iPad, WiFi Analyzer Diag needs an ESP32-C5 board with its firmware installed. Install it over USB from a Mac or a Windows PC with Belksiri Firmware Installer: download and instructions.

On a Windows PC, the board is optional: the PC scans Wi-Fi itself with its Wi-Fi adapter. If Windows refuses the scan, check Settings › Privacy & security › Location. A board with at least 4 MB of flash can serve as an external measurement source over Bluetooth LE. There are two ways to install its firmware: from WiFi Analyzer Diag over USB, or with Belksiri Firmware Installer, a free standalone utility that prepares a board without WiFi Analyzer Diag. The installer’s Windows x64 version is an unsigned preview: see the download page for what has been tested.

User guide

The complete guide to WiFi Analyzer Diag: first steps, Scan, diagnostics, coverage surveys, reports and settings. The screenshots show the English interface. Download the guide (PDF, 10 MB)

Documents

Privacy Policy · Terms of Use