Preparing the ESP32-C5 board
On iPhone and iPad, WiFi Analyzer Diag measures with an ESP32-C5 board. To install its firmware, connect the board over USB to a computer and use Belksiri Firmware Installer, a free standalone utility: no WiFi Analyzer Diag, account, Internet connection or developer tool is needed on that computer.
State of this version
- Pre-release for Apple silicon Mac, Intel Mac and Windows x64 PC.
- Apple silicon Mac: Developer ID signed and notarised by Apple. USB installation validated on a real board: an ESP32-C5 (4 MB, CH340 USB bridge) was flashed, read back byte for byte, and the firmware started. Still to confirm: the connection and scan from WiFi Analyzer Diag on iPhone or iPad after this installation.
- Intel Mac: Developer ID signed and notarised by Apple. Only started under Rosetta on an Apple silicon Mac: not tried on an Intel Mac, no USB installation tested.
- Windows x64: not signed (no Authenticode certificate). Built, tested on simulated boards and started on a GitHub Actions Windows machine: not tried on a real PC, no USB installation tested.
- Language of the utility: English only, whatever the language of this page. The labels quoted below are therefore in English, as on screen.
Download
| For | File / SHA-256 |
|---|---|
| Mac with Apple silicon (M1 and later) | Belksiri-Firmware-Installer-1.0.1-fw1.0.4-macos-arm64.dmg2cf3667e6c9a7b8370124ca9aaf34031b44b6f8251c57f6d673ba4d7cde9db6f |
| Intel Mac | Belksiri-Firmware-Installer-1.0.1-fw1.0.4-macos-x64.dmg0be4b13d6b6c7070c99f69e92a6080d21f6b0e823968c6882a9a0039ebf1ef40 |
| Windows 10/11 x64 PC | Belksiri-Firmware-Installer-1.0.1-fw1.0.4-windows-x64.zip40eeee64e8a91a837edc1b521a828417c6dabb7f47d5339d40974ea22972bcf1 |
Everything about this version, and the SHA256SUMS.txt file, is on the release page.
To check a downloaded file, compare its checksum with the one above: shasum -a 256 <file> in Terminal on Mac, Get-FileHash <file> in PowerShell on Windows.
Requirements
- macOS 12 or later, or Windows 10/11 x64.
- An ESP32-C5 board with at least 4 MB of flash. Any other chip, or a smaller or unreadable flash, is refused before anything is written.
- A USB data cable: many cables only charge.
- USB driver: none for the ESP32-C5’s native USB port. Boards with a CP210x or CH340 bridge need a driver, from that chip’s maker, on Windows only.
Included firmware
ESP Device Studio 1.0.4 for ESP32-C5 (ESP-IDF v5.5.4). SHA-256 of the image: 83de9994a710dba224c7ccb0248bb4e2334af38ce3e32e818c5d0cba66a9a499, checked by the utility before writing. It bundles the espflash 4.5.0 flashing tool (MIT and Apache-2.0 licences), unmodified.
Opening the application the first time
Mac
- Open the
.dmgfile and drag Belksiri Firmware Installer to Applications. - Open the application and confirm: macOS asks once for a downloaded app.
Windows
- Unzip the whole ZIP file (portable version, no administrator rights), then run
BelksiriFirmwareInstaller.exe. - As the file is not signed, SmartScreen shows a warning on first launch. Check the checksum, then choose “More info” and “Run anyway” for this application only.
Installing the firmware
- Connect the ESP32-C5 board to the computer with a USB data cable.
- Check the board line:
ESP32-C5 (rev v1.0) · 4 MB flashCompatible. If several boards are connected, choose one. - Click Install firmware and confirm.
- Wait for Firmware installed and verified. Do not unplug the board or close the window while it runs.
- On the iPhone or iPad, open WiFi Analyzer Diag and connect to the board over Bluetooth.
What is erased: the settings stored on the board, including its Wi-Fi network and password. The confirmation dialog says so. “Verified” means the board was read back and matches the image; connecting from WiFi Analyzer Diag then confirms the firmware runs.
If the board does not respond
Hold the BOOT button, press and release RESET, release BOOT, then click Try again. On an error, Copy details copies a report to include in your message to mboti.dev@gmail.com.